High Purity Tungsten Disulfide WS2 Powder CAS 12138-09-9, 99.9%
Tungsten dioxide is its name. Formula: 247.97 Molecularweights W2. Furthermore, hexagonal packaging contains 99.9% pure
About
Tungsten Disulfide WS2:
Tungsten disulfide
It can also be combined with other metals such as tungsten, sulfur.
Tungsten disulfide chemical formula
It is
WS2
. It is part the Transition Metal Dihalides. Also known as Trend-Metal Dihalides, this material can also be called: This material is part of certain catalysts used for hydrodesulfurization and hydrodenitrogenation.
WS2 tungsten disulfide
MoS2-derived MoS2-derived Modell has a similar structure. In Watoms, you can locate the MoS2 Coordinatsphere. They are all housed within the three-dimensional prism. The prism was heated to make organic nanotubes. Many WS2Crystals come in dark colours. Many WS2Crystals come in dark colours. Transparent transparent WS2Crystals enable layer visibility. Perhaps MoS2 is an option. Many thought oxygen ambient would have no effect on the WS2. Studies on single-layer, environment-dependent WS2 oxidation have revealed that the contrary is true. You can convert W2 quickly into pure, high-quality tungstenoxide by photooxidation. This can also be done outdoors. The skin can become sensitive to sunlight. To decrease the amount of photooxided materials to below 1.88eV (570nm), WS2 can be used. To achieve this, only oxygen and water is required. You get sulfuric and/or tungsten acids. It may also be true for semiconductor dihalides. The dihalides were also tested in normal conditions. This dihalide is also compatible with WS2. This dihalide can also be used in combination with WS2 or Hydrofluoric. In oxygen rich areas, WS2 may turn to tungsten dioxide if heated. Once heated, however, WS2 can not melt. It will become tungsten dioxide. The melting points of WS2 are 1250°C and 1250°C. With chemical exfoliation, monolayers can easily be removed. If lithium is placed into Hexane using ultrasonics, it will produce Li compounds. Many methods can be used to get rid of W2S2 such as the chlorosulfonic or halide. You will find the most current information on this page. Here you will find all the current information.
Tungsten disulfide
Prices
Get tungsten d if you wish to
Isulfide powder
Bulk buying is possible.
Tungsten Disulfide details:
Tungsten Dioxide particle sizes: FSSS=0.4 to 0.7 mm; FSSS=0.85-1.15 mm. 80nm Tungsten Disulfide purity: 99.9%
W
|
S
|
Al
|
As
|
Cl
|
Cu
|
Fe
|
Ni
|
P
|
Si
|
O
|
74.12
|
25.82
|
0.001
|
0.002
|
0.03
|
0.002
|
0.005
|
0.002
|
0.002
|
0.003
|
0.002
|
It's simple.
Tungsten Disulfide WS2 produced?
1. Roasting is used for decomposition. It should be stirred once an hour. Mixture should cool to room temperature after reaching 57-60C. The mixture should be left at room temperature for sixteen hours. To form the mixture, ammonium sulfuride reacts to ammonium. Ammonium Tetrathiotungstate results. Ammonium Tetrathiotungstate is heatable to make tungstenoxide. H2WO4+2NH3*H2O-(NH4)2WO4+2H2O (NH4)2WO4+4H2S-(NH4)2WS4+4H2O
2(NH4)2WS4+3O2-2WS2+4NH3+2S+2SO2+H2O
2. The liquid sulfur tungsten, sometimes called liquid sulfur is often called W2B. This can be done by mixing the green and red colors. By combining tungsten or other sulfur, you can produce WS2. Reacting at 600pa-606pa can create orthorhombic compounds.
3. By heating the ammonium-tetrathiotungstate and decomposing it, under the condition that the air is isolated, the temperature increases from room to 700 to 1200. You can prevent temperature swings by keeping it at the same temperature for minimum 24 hours. It can heat up to 130-110 Celsius in an hour. A room that has been heated for more than 24 hours will reach temperatures of 30 to 110 Celsius within an hour.
You have many choices for ultrafine and thin tungstenoxide. Environment ensures safety.
Applicaciones
Tungsten Disulfide WS2:
Tungsten disulfide
It's possible.
tungsten disulfide lubricant, tungsten disulfide grease.
Tungsten dioxide2W2 friction coefficient 0.03 This renders it more powerful than graphite(PTFE), graphite[MoS2],graphite[MoS2],graphite[MoS2],graphite[MoS2],graphite [MoS2], and graphite[MoS2], as well graphite[MoS2], graphite[MoS2], and graphite[MoS2], which makes it even better than graphite(MoS2],MoS2], MoS2],MoS2],MoS2], but not,MoS2], however,MoS2], or graphite[MoS2],MoS2], moS2],MoS2],MoS2],MoS2],MoS2],MoS2],MoS2],M2],MoS2],MoS2],MoS2],MoS2,MoS2 It is extremely lubricious. It is also suitable for use in electronic equipment, such as transistors and sensors. It is possible to combine it with alcohol.
It's widely used in extrusion, mold making and other applications.
It can also be used in combination with hydraulic oils. This oil can be mixed with other synthetic oils or grease. To protect your surface, it can be mixed with grease or synthetic oils. Oil can also be mixed with it to help keep the oil out of your pores. It is resistant to more chemicals than other oils. The oil lasts longer than other oils.
For parts less than 1 mm in diameter, tolerances may be possible.
You can use this to cook and maintain medical equipment.
Also, ambient heat can be used to substitute the base material. However, WS2 doesn't become unstable or unpredictable.
Strength can be improved with PVD or W2.
Tungsten Disulfide Powder Storage Conditions:
You should keep the air free of tungsten dioxide. This may disperse through water. Be cautious with W2Pulp
Packing and Shipping Tungsten Disulfide WS2 Pulver:
You can buy Tungsten dioxideW2 at different prices depending on your order.
Tungsten Disulfide Powder Packaging: vacuum packing 100g to500g at 1kg/bag @ 25,5kg/barrel. You have other options.
Tungsten diulfide Powder Shipping: After payment receipt received, can ship via sea or air.
Nanotechnology Co. Ltd. is able to supply high-quality chemicals. Order graphiteboride.
What you need is high-quality, top-quality merchandise
tungsten disulfide powder
Questions are welcome. (
brad@ihpa.net
)
Tungsten Sulfide Properties
|
Titles
|
tungsten sulfide (WS2), tungsten disulphide,
tungsten(IV) sulfide, WS2 powder
|
|
12138-09-9
|
Combined Formula
|
WS2
|
Mobility
|
247.97
|
Appearance
|
Black powder or gray powder
|
Melting Point
|
1250 degC
|
Boiling Point
|
N/A
|
Density
|
7.5 g/cm3
|
Solubility
|
N/A
|
Thank
|
247.895074
|
|
|
|
|
Tungsten Sulfide Health & Safety Information
|
|
Alert
|
Hazard Statements
|
H315-H319-H335
|
Hazard Codes
|
Xi
|
Risk Codes
|
36/37/38
|
Privacy statement
|
26-37/39
|
Transport Information
|
N/A
|
Inquiry us