Stearic Acid Series

  • 0
  • 0

High Quality EBS Ethylene Bis Stearamide Emulsion

EBS Ethylene Bis Stearamide Emulsion, a white emulsion. It is safe for the environment, is not toxic, isn't polluting and is non-hazardous. This product can be used to make inks, paints and leather coats. Particle Size: D50: =2mm

Product name: Ethylene bis stearamide emulsion

Formula: C38H76N2O2

Products property This product was produced using modern technology. The appearance of the product is white emulsion. This product is not toxic, polluting, hazardous, or harmful to the environment. The product is very easy to disperse into water. It has a low viscosity and ultra-fine texture.

EBS Ethylene bis Stearamide Emulsion :
EBS Ethylene Bis Steramide is a cream-colored lotion. Ebs Ethylene Bis Steramide, a high-melting point white wax with a very hard melting point, is nontoxic. The industrial products have small yellow particles. They are stable in water and acid-base solvents. This powder contains soluble hydrocarbons as well as aromatic hydrocarbon solvents. The compound has wettability in water of 80°C or more.
EBS stands for Ethylene-bis Steramide. This synthetic wax has a high melting point and two-pole key. Because of its unique structure, it can be used in most thermoset and thermoplastic applications. The best pigment dispersants for the finished product are the outer and lubricants.
Ebs Ethylene Bis Steramide a plastic lubricant is new and widely used in PVC products. The stearate has a better internal lubrication and external lubrication that lubricants, like polyethylene wax. Plastic molding is improved by the fluidity of the fused plastic. Thus, plastic processing can be more efficient and yields are higher. Energy consumption is also reduced. Additionally, this product is very smooth and has high quality surface finishes. Send an inquiry for the most current price to purchase bulk EBS Ethylene Bis Stearamide Emulsion.

Ethylene Bis stearamide emulsion properties:
EBS Ethylene Bis Stearamide Emulsion, a white emulsion. It is safe, effective, environmentally-friendly, and non-polluting. It can be easily dispersed in water.

It is simple. EBS Ethylene Bis Stearamide produced?
You can divide EBS's synthesis technique into 4 routes.
Combining stearic acid and amine compounds
Reacting with an amine compound to the stearate react is called "the stearate"
The hardy amine and chloride compounds are not recommended.
Hydrolysis of the nitrile.
First and second are most common. The first is the most common. It is straightforward, requires no reaction conditions, has three disruptions but is low in purity. Although the EBS is large, the energy consumed is substantial, the process can take a while and is lengthy.

Use of EBS Ethylene Bis Stearamide Emulsion :
EBS Ethylene Bis Stearamide Emulsion, a white emulsion. It is safe, effective, environmentally-friendly, and non-polluting. It can be easily dispersed in water.
1.Plastic
There are many types of thermoplastic and thermoset polymers that can be used as sliding agents. These include ABS, PS and AS. They also come in PP, PVAC and Cellulose. Accurate, Accurate and Nylon. Amino plastic, Phenolic resin, etc. have excellent finishes and great release property.
An auxiliary agent can also be used as an internal release agent in thermoplastic PUR molding. The amount of the agent is between 0.1 and 1%.
Polymethylene gulf agents add 0.5% of additional, increasing melt flow rates and whiteness. The thermal stability and physical indicators for polyoxymethylene also increase.
2. Rubber
EBS, synthetic rubbers and polychloroprene (GRS) are added 1 to 3 percent to their emulsion. They have excellent anti-sticking and antiblocking abilities. EBS is also applied to automotive flooring mats, drain pipes, and other rubber products. This gives them a higher surface gloss.
3. Chemical fiber
EBS increases the heat resistance and fluidity of polyamide, polyester fibers, as well giving them an antistatic property.
4. Type
Casting sand can be added to a phenol-based resin in order to include EBS as an example agent.
5. Pigment, filler dispersant
EBS can be used as a plastic. Chemical fiber parent: ABS, PS. Polypropylene. Polyester pellets.
EBS can be used to color plastics with a spread of powdered EBS.
The pigment filler amount determines how much is added.
6. Powder coating
EBS can also be used to aid in the preparation of powder coatings.
7. Coatings, inks
To improve the performance of paints and paints, you can add 0.5% - 2% EBS.
You can use it in furniture polishing agents or printing inks.
8. Uses other than those listed
The melting point of petroleum products
For electrical components, lubricants and corrosion inhibitors for wires made of metal;
Below the papermaking agent, and above the paper coating components
You can dye textiles with a dyeing engineer defoamer, or as a permanent dyeing agent.
You can add this product to asphalt. This will lower the asphalt's viscosity and improve its weather resistance.

Technical Information of Ethylene bis Stearamide Emulsion

Product EB-20
Solid content. % 20+-2
Cps, viscosity <=100
Particle Size D50 <=2um
PH 7-9

Shipping and Packing of Ethylene bis stearamide emulsion
There are many options for packing depending on Ethylene Bis Stearamide Emulsion quantities.
Ethylene Bis Stearamide Emulsion packing: 25kg/barrel
Ethylene Bis Stearamide Emulsion shipping: Could be sent by sea or air as soon as possible after receipt of payment.

EBS Ethylene Bis Stearamide Emulsion Properties

Other Titles 1,2-Bis(stearoylamino) ethane N,N'-1,2, Ethanediylbisoctadecanamide,
N,N'-Ethylenedi(stearamide), Ethylene distearylamide
N/A
Compound Formula C38H76N2O2
Molecular Weight 593.038 g*mol-1
Appearance Crystals of white, waxy color
Melting Point 144 to 146°C
Solubility In Water N/A
Density N/A
Purity N/A
Particle Size D50: <=2mm
Boling Point N/A
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young’s Module N/A
Exact N/A
Monoisotopic N/A

EBS Ethylene Bis Stearamide Emulsion Safety & Health Information

Safety Notice Alert
Hazard Statements H315, H319, H335
Flashing Point 280 degC
Hazard Codes T
Risk Codes N/A
Safety statements N/A
RTECS # N/A
Transport Information N/A
WGK Germany N/A

Inquiry us

Our Latest Stearic Acid Series

High Purity Sodium Laurate CAS 629-25-4

The ultra-fine powder sodium laurate can be described as a white, fine powder. It has outstanding decontamination, foaming and emulsification capabilities. Product name: Sodium Laurate Molecular formula:CH 3(CH 2? 10 COONa Sodium Laurate ?…

High Purity Potassium Oleate CAS 143-18-0

Potassium oil, also called Potassium cit-9-octadecenoate. C18H33KO2 is its chemical formula. Potassium oil is either a solid brown or transparent liquid. It's a fatty acid potassium that is found in natural soaps. Product name: Potassium Oleate…

High Quality Sodium Oleate CAS 143-19-1

Sodium oleate also goes by the name oleic acids soap. It is a white powder to slightly yellowish or pale brownish-yellow powder. The alkaline sodium oleate dissolves in water. Product name: Sodium Oleate CAS NUMBER143-19-1 Molecular formula:C…