Nitride Powder

  • 0
  • 0

High Purity AlN Ceramic Powder Injection Molding Components

Aluminum nitride does not corrode by molten or other molten metals, as well as gallium arsenide. It also has excellent resistance to corrosion of molten iron.

About AlN Ceramic Powder Injection Molding Components : Aluminium nitride chemical formulation AIN. Aluminum Nitride is Covalent bond compounds are atomic crystals that belong to diamond-like, hexagonal nitride and wurtzite types crystal structures. They can be non-toxic, toxic, white, or off-white. AlN Aluminum nitride Stabilizes up to 2200 Strength at room temperatures is good. The strength declines with temperature. It is heat resistant and has a high thermal conductivity. This crucible metal is ideal for melting pure iron or aluminum, and can be used to cast them. It has a strong resistance against molten metallic erosion. Aluminium nitride can also be used as an electrical insulator. It has good dielectric properties and promises to become an important component of an electrical system. It is also an electrical insulator with good dielectric properties and is promising as an electric component. aluminum nitride coating Protects gallium arsenide from ion implantation during Annealing by putting a protective layer on its surface

Globally trusted AlN Ceramic Powder Injection Molding Components Source . You can send us an inquiry regarding the latest. Aluminum nitride Prices Anytime.

Aluminum Nitride AlN Ceramic Microsphere Product Performance:
AlN ceramic powder molding components offer excellent performance and low cost. They can also be made in large quantities with high complexity shapes.

AlN Ceramic Powder injection Molding Components Features:
Very high thermal conductivity
High strength
Excellent accuracy
Superior insulation
Available for complex shape customization
Resistance to plasma

Specification: AlN Ceramic Powder Injection Moulding Components

Properties Tr-C210 Tr-C170
Density in g/cm3 3.33 3.32
Temperature conductivity (W/m*K). 210 170
Bending Strength (MPa) 300 410
Insulation (KV/mm) 27 31
Dielectric 8.9 8.8
CTE (11-6) 4.9 4.6

How is AlN Ceramic Pulinjection Molding Components Created?
The preparation of Al powder nitride ceramics through direct nitriding
Al powder can be prepared by direct nitriding. This is the most common method of making AlN powder. Aluminum powder is heated with nitrogen in this process. Aluminium powder reacts with nitrogen to make aluminum nitride at 800-1200 degrees Celsius.
This process has many advantages, including abundant raw material, easy cost and no side reactions. These advantages are not without their drawbacks. In the beginning stage of the reaction, aluminum powder particles gradually develop a nitride coating on the surface. This prevents nitrogen from absorbing further, and results in lower yields. The reaction between aluminum and Nitrogen is exothermic. Because of this, the process is fast. AlN powder will self-sinter. It will also form agglomeration which makes the powder particles smaller.
Al2O3 Carbothermal Reduction, Self-spreading High-Temperature Synthesis, and high-energy Ball Milling are all methods to prepare aluminum nitride dust.

Applications AlN Ceramic powder Injection Molding Components :
1. Aluminium nitride is a powder that has high purity and low particle sizes. It also exhibits high activity. It's the principal raw material used to manufacture high thermal conductivity aluminum-nitride ceramic substrat.
2. Aluminium nitride clay substrate exhibits high thermal conductivity and low expansion coefficient. It makes a good substrate and package material for large-scale, integrated circuits.
3. Aluminum nitride's hardness is much higher than the traditional alumina. Although it is a novel type of ceramic material that wears well, its cost makes it unsuitable for use in parts that have severe wear.
4. You can use the heat resistance, thermal shock resistance and melt erosion resistance of AIN ceramics to make GaAs crystals, Al evaporation plates, magnet fluid power generation devices and high-temperature turbo corrosion resistance parts. Its optical properties are also useful for infrared windows. The aluminium nitride foil can also be used as a high frequency piezoelectric element and large-scale substrate for integrated circuits.
5. The aluminum nitride is resistant to heat and corrosion, and can be easily eroded by alkaline solutions. When exposed to moist air, the new surface forms an oxide layer. It can also be used to make a casting material and crucible for melting aluminum, silver, and lead. AIN ceramics can be used to replace the toxic beryllium-oxide ceramics in electronics.

AlN Ceramic Powder Injection-Molding Components Storage Conditions:
AlN ceramic dust injection molding components will suffer from damp reunion. This can affect their dispersion performance as well as the effects of use. The AlN ceramic powder inject molding components must be stored dry in a vacuum bag. You should also avoid stress.

Shipping and Packing of AlN Powder Injection Molding Components
Many types of packing are available depending on the quantity of AlN ceramic powder-injection molding components.
AlN ceramic powder injection molding components packaging: vacuum Packing, 1kg/bag 25kg/barrel or as per your request
AlN ceramic powder-injection molding components shipping: can be shipped by sea, air or express once payment has been received.



Nanotechnology Co. Ltd. (), a global trusted supplier and manufacturer of high-quality chemical materials, is well-known for its 12-year experience providing Nanomaterials such as boride, nitride, graphite, sulfide, 3D printing powders, etc.
You can contact us to request high-quality Aluminium Ceramic Powder Injection Moulding Components. (brad@ihpa.net)

AlN Ceramic powder Injection Molding Components Properties

Other Titles Aluminium nitride
24304-00-5
Compound Formula AlN
Molecular Weight 40.9882
Appearance From white powder to pale yellow powder
Melting Point 2200 degC
Boiling Point 2517 degC (dec.)
Density 2.9% to 3.3 grams/cm3.
Solubility of H2O N/A
Electrical Resistivity 10 to 12 10x 10x O.m
Poisson's Rate 0.21 bis 0.31
Specific Heat 780 J/kg-K
Thermo Conductivity 80 to 200 W/mK
Thermal Expansion 4.2 to 5.4 um/mK
Young's Module 330 GPa
Exact mass 40.9846
Monoisotopic 40.9846

AlN Clay Injection Molding Components Safety & Safety Information

Comment Danger
Hazard Statements H314-H335
Hazard Codes Xi
Risk Codes 36/37/38
Safety statements 26-37/39
RTECS # N/A
Transport Information N/A
WGK Germany 3

Inquiry us

Our Latest Nitride Powder

High Purity AlN Ceramic Powder Injection Molding Components

TRUNNANO is a reliable supplier for high purity AlN Ceramic Powder Injection Molding Components.…

High Purity Aluminum Nitride AlN Ceramic Microsphere, 99.5%

TRUNNANO is a reliable supplier for high purity Aluminum Nitride AlN Ceramic Microsphere, with purtiy above 99.5%. Send a quote for latest price.…

High Purity Spherical Aluminum Nitride AlN Granule CAS 24304-00-5, 99.5%

is a reliable supplier for high purity spherical aluminum nitride AlN granule CAS 24304-00-5, 99.5%.…