Carbide powder

  • 0
  • 0

High Purity Zirconium Carbide ZrC Powder CAS 12070-14-3, 99%

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Zirconium carbonide (ZrC), a refractory ceramic that has a high hardness, is used commercially to make tooltips. It's usually made by sintering. Particle Size: -325mesh
Purity: 99%

Zirconium Carbide Pulver:
Zirconium carbide ZrC It is used commercially to cut tooltips. It is often sintered. Zirconium carbide It is hard. Zirconium carbide melting point 3504degC Zirconium carbide Point boiling Temperature is 5100degC The apparent density of the material is 6.70 g/cm3. Mohs hardness ranges from 8-9 Is insoluble with cold water and hydrochloric acids. It dissolves in hydrofluoric and hot concentrated sulfuric, containing either nitric acid (or hydrogen peroxide). At high temperatures, it reacts with chlorine to make zirconium trichloride. It burns at 700 degrees Celsius in the air and produces zirconia. You should not mix it with water.

ZrC powder It is a powder of gray metal with cubic crystal structures. High resistance to corrosion. These interstitial transition metal carides of group IV are members of the ultra-high temperatures ceramics (UHTC). ZrC's thermal conductivity is 20.5 W/m*K, and its electrical conductivity (resistivity is 43mO*cm) are both similar to zirconium. Due to the strong ZrC covalent bond, ZrC has a very high melting temperature (3530degC), high module (440 GPa), as well as a low hardness (25 GPa). ZrC's density is 6.73g/cm3 lower than that of other carbides, such as TaC (14.75 g/cm3) or WC (15.8g/cm3). ZrC appears to be suitable in reentry, rocket/hyper-jet and supersonic aircraft where high density is a critical requirement.

As with most carbides from refractory materials, zirconium carbonide is substoichiometric. It contains carbon vacancies. If the content of carbon exceeds ZrC0.98, it is considered free carbon. Between 0.65 and 0.98, the ZrC-to-carbon ratio to metal is stable.

To receive the latest information, send us an inquiry Zirconium carbide price Please fill out the form below if you wish to buy Zirconium Carbide ZrC Powder In bulk.

Zirconium Carbide Nanoparticles Nano ZrC Pulse Product Performance:
Zirconium carbonide nanoparticles, CAS 12070-14-3, have high purity, small particles, uniform distribution and high specific surface activity. High melting point, high strength, corrosion resistant high-temperature material is Nano ZrC. This powder can absorb visible light efficiently, reflect infrared, and store energy.

Technical Parameter: Zirconium Carbide Nanoparticles NanoZrC Pulp:
Product name MF Purity Particle size Crystal Form SSA The color of the sky
Zirconium Carbide Nanoparticles ZrC 99% 20nm Cubic 11m2/g Black

It is simple. Zirconium Carbide ZrC Powder produced?
Zirconium carbonide can be made in many different ways. A carbothermal reaction is an option. This involves zirconia and graphite. This produces powder. By sintering ZrC at temperatures higher than 2000oC, the powder can be transformed into dense ZrC. ZrC powder can also be hot pressed to lower its sintering temperatures, resulting in fine ZrC particles. Full-density ZrC can be made by spark plasma sintering.

You can also make zirconium carbide using solution-based processes. It is done by heating the metal oxide in acetylacetone.

Chemical vapor deposition (CVP) is another method of manufacturing. It is possible to heat the zirconium sponge, and also decompose the gas halide.

ZrC cannot be used if it has a lower oxidation rate than 800oC. The preparation of composite materials is one way to increase the resistance to oxidation for ZrC. ZrC–ZrB2 is the preferred composite material. These composite materials are capable of working at temperatures above 1800°C. This situation can be improved by using another material, such as TRISO fuel particles as a barrier.

Applicaciones Zirconium Carbide ZrC Powder:
Zirconium carbide is a type of high melting material that has high hardness, excellent heat refractory and high hardness. This material is commonly used to make alloy steel. Also used in the manufacture of zirconium tetrachloride (Zirconium Tetrachloride) and other promising ceramic materials. Zirconium carbonide can be used in an incandescent filament. It's mainly used now as an abrasive. This can be used to make cemented carbide.
Zirconium carbonide is a ceramic hard material that can be used for cutting. The zirconium carbonide (ZRC), which is made by sintering has high temperatures oxidation resistance and high strength. It also exhibits high thermal conductivity, toughness, and high toughness. Additionally, nanopowders of zirconium carbonide (ZrC), exhibit high visible light absorption, great infrared reflection, and have large energy storage capabilities.
Coating material
As refractory coats in nuclear reactors, ZrC is not used. It is less susceptible to radiation damage and has a lower neutron absorption. You can use it as a protective coating on uranium dioxide, OR dioxide particles and nuclear fuel. In a fluidized-bed reactor, superheated chemicalvapor deposition usually results in coatings. The material has excellent emissivity at high temperatures and high current capacities, which makes it ideal for use in thermo-photoelectric heaters, field emitter tips, and arrays.
Concrete tools
These cemented carbide compound can be used to drill and make other tools with wear resistance because of their hardness. Zirconium carbide, also known as ZrC (zirconium carbide), is a highly-functional high-temperature material that has high melting points and excellent strength. This material can be strengthened and resistant to corrosion by using cemented carbide.
Nanostructured parts
Zirconium carbide nanoparticles may be used in the metalurgical, chemical, or aerospace industries. The textile industry can use it to produce nylon and other carbide-thermostatic textiles. They are also used in composites for metal substrates and ceramics.

Transport and packing of Zirconium Carbide Nanoparticles Nano ZrC Pulp:
There are many options for packing, which all depend on the quantity of zirconium nanoparticles.
Zirconium carbide nanoparticles packing: You can vacuum pack 1kg/bag, 25kg/barrel or according to your requirements.
Shipment of Zirconium Carbide Nanoparticles Possible shipping options include express, air and sea.


Whatsontianjin advanced materials Nano Technology Co. Ltd., (Whatsontianjin), is a reliable global supplier and manufacturer who has over 12 year experience in producing super-high-quality chemicals.
We can provide high-quality zirconium carbonide powder. Please contact us to send an inquiry. ( brad@ihpa.net )

Zirconium Carbide Properties

Other Titles zirconium(IV) carbide, methylidynezirconium, ZrC powder
12070-14-3
Compound Formula ZrC
Molecular Weight 103.23
Appearance Gray Powder
Melting Point 3532
Boiling Point 5100
Density 6.73 g/cm3
Solubility of H2O N/A
Exact mass 102.912529

Zirconium Carbide Safety & Health Information

Signal word Danger
Hazard Statements H228-H302-H312-H332
Hazard Codes F, Xn
Risk Codes 11-20/21/22
Safety statements 16-27-33-36/37/39
Transport Information UN 3178 4.1/PG2

Inquiry us

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Vanadium Boride VB2 Powder CAS 12007-37-3, 99%

High Purity 3D Printing Alloy CoCrW Powder

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

Supply Magnesium Granules Mg Granules 99.95%

High Purity Magnesium Diboride MgB2 Powder CAS 12007-25-9, 99%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

Our Latest Carbide powder

Aluminum Silicon Carbide Al/SiC

TRUNNANO is a reliable supplier for high quality Aluminum Silicon Carbide Al/SiC .…

High Purity Niobium Carbide NbC Powder CAS 12069-94-2,99%

is a reliable supplier for high purity Niobium Carbide NbC Powder CAS 12069-94-2, 99%.…

High Purity Tungsten Carbide WC Powder Cas 12070-12-1, 99%

Tungsten carbide, a mixture of tungsten (and carbon), is an organic compound. The molecular formula of tungsten carbide is WC, and its molecular weight is 195.85.Size of the particle: -325mesh Purity: 99% About Tungsten Carbide WC Powder: Tungs…