Carbide powder

  • 0
  • 0

High Purity Tantalum Carbide TaC Powder Cas 12070-06-3, 99.9%

Tantalum carbid is a white metal-like cubic cubic crystalline product that falls under the category of sodium chloride. At the moment, tantalum carbide is used as an inhibitor for cemented carbide-sintered grain growth. Particle Size: 325mes

Tantalum-Carbide TaC Powder :
Tantalum carbide It is a metallic cubic, crystalline powder. This forms a binary chemical compound of carbon and tantalum. They are extremely tough, delicate, and refractory ceramic material with metallic conductivity. They are typically sintered to make brownish-gray, powdery forms. It is a sodium chloride-type cubic crystal. Presently, tantalum carbid is used in the cemented carbide sintered seed grain growth inhibitor. This has a notable effect on grain growth and has a density at 14.3g/cm3.

Tantalum caride is insoluble when dissolved in water. It is resistant to oxidation and can be easily melted with potassium pyrosulfate. Tantalum carbid has high electrical conductivity. At room temperature it is resistant to 30O and shows superconducting qualities. Tantalum carbonide is used in powder metalurgical, the cutting of ceramics and chemical vapor desposition. You can use the golden-yellow sintered body made of tantalum caride as watch decorations.

This complex combination of covalent elements and metal ions makes the bond between tantalum carbide atoms and carbon atoms. Carbide materials are very tough and hard due to their strong covalent component. TaC is a good example. It has a microhardness range of 1600 to 2000 km/mm2 (9mH), an elastic modulus between 285gPa and 110kg/mm2. Tantalum, on the other hand, has equivalent values at 186gPa. TAC has a higher carbon content, which increases hardness and yield stress.

When tungsten carbide is used in cutting applications, it may be added as a cermet.
Tantalum carbide melting point Tantalum carbide's melting point is 3880°C depending on how pure it is and what measurement conditions are used. This is one of the most important binary compounds. The melting point for tantalum carbide ha is about 3942degC higher than that of carbideclam, which has an equivalent melting point to TaC.

To receive the most current information, send us an inquiry tantalum carbide price Please fill out the form below if you wish to buy Tantalum Carbide Powder In bulk.

Technical specifications of Tantalum Carbide TaC powder
CAS Number: 12070-06-3
TaC powder true density: 13.9g/cm3 Tantalum carbide
2.25g/cm3 - Tantalum carbide TaC dust Bulk Density
Crystal Structure of the Tantalum carbide TaC Powder: Cubic
TaC powder Tantalum carbide APS 1000 nm (Can also be customized)
Tantalum carbide TaC + powder SSA: 15. m2/g
TaC powder purity: 9+% Tantalum carbide
TaC powder, Tantalum Carbide Solubility: Insoluble
TaC powder Tantalum Caride TaC appearance: Black-gray, odorless

T.C

F.C

O

N

Al

Fe

Na

Ca

K

Si

>6.32%

<0.08%

<0.3%

<0.003%

<0.004%

<0.042%

<0.003%

<0.003%

<0.004%

<0.003%


Tantalum carbide Properties:
Tantalum carbonide TaC (Mohs hardness 9.0-10) is a hard refractory clay material. It's used for tool bits that are designed to cut tools. Diamond can surpass this level of hardness.
It's a dark brown powder, which is usually sintered.
This is often used in fine-crystalline additions to tungsten carbide alloys.
Tantalum carbonide is the only stoichiometric binary material with the highest melting point (3880degC) at 4150K and the lowest boiling point (5500 oC).
TaC0.89, a substoichiometric chemical has a melting point of 4270 K (4000degC).

How does Tantalum-Carbide TaC Powder get made?
Tac powder is made by heating graphite in the presence of an atmosphere of inert gases (argon) or in vacuum. Heat was used to heat the powder at approximately 2000°C using either an arc melting furnace or a furnace. An alternative method involves heating carbon tantalum dioxide in a vacuum or hydrogen atmosphere to reduce the temperature. However, this technology does not allow for thermometrically controlled control over the product. TAC directly is made from the component through self-propagating, high-temperature synthesizing.

Tantalum Carbide Uses :
Carbide, capacitors and electronic components are the main applications of tantalum caride. In order to improve the physical properties, carbides are commonly added to the powder wear of tungsten/cobalt/cobalt (WC/CO) to increase their effectiveness in sintering.
Tantalum carbide is also used to inhibit the formation of large grains in order to ensure optimum hardness.
You can also use it as a coating for steel molds during aluminum alloy injection molding. This provides high wear resistance and low friction surfaces.
You can also use carbides to create sharp instruments with high mechanical resistance and hardness. Tantalum carbide can be also used for the following:
1. Cemented carbide
Tintalum carbide is an important component in cemented carbide. It enhances the alloy's properties through improved fibrous tissue and phase conversion kinetics. The alloys are then stronger and more phase stable.
2. Electronic industry
While Natunction shares many benefits with carbide nanomaterials, it has its own special side. It has high hardness, 9-10 at normal temperature, and a high melting point of 3880 degrees C.
3. High-temperature Alloy
The melting of carbide is, preferably, a tantalum carbonide(TAC) at 3890°C and carbide (37880°C), followed by carbide (2500°C). The materials' mechanical properties are excellent at high temperatures.

Storage condition TaC powder Tantalum carbide :
TaC powder's dispersion and usage performance will be affected by the damp reunion. Tantalum carbide TaC should therefore be vacuum packed and kept in cool, dry rooms. Tantalum Carbide TaC Powder cannot be exposed to air. Ti2AlC should not be exposed to stress.

Shipping and Packing of Tantalum Caride TaC Powder :
We offer many packing options that are dependent on the Tantalum carbid TaC powder amount.
Packaging of Tantalum Carbide TaC powder: Vacuum packaging, 100g,500g or 1kg/bag. 25kg/barrel. Or as you request.
Tantalum carbide TaC (tantalum powder) shipping: Could be shipped by sea, air or express, as long as the payment receipt has been received.


Tatayoung advanced materials Nano Technology Co. Ltd., (Tatayoung), is a global manufacturer and supplier of high-quality chemical materials. It has over 12-years experience providing superior quality chemicals and Nanomaterials such as boride, nitride, graphite, sulfide, 3D printing powders, and others.
Are you looking for? Quality tantalum carbide powder Feel free to contact us. Get in touch You can also send us an enquiry. ( brad@ihpa.net )

Tantalum Carbide Properties

Other Titles tantalum(IV) carbide, TaC powder
12070-06-3
Compound Formula TaC
Molecular Weight 192.96
Appearance Brown to Dark Brown Powder
Melting Point 3850 degC
Boiling Point 4780-5470 degC
Density 14.3-14.7 g/cm3
Solubility of H2O Insoluble
Specific Heat 36.71 J/mol*K
Thermo Conductivity 21 W/m*K
Exact 192.947996

Hafnium-Diboride Safety & Health Information

Signal word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety statements N/A
Transport Information NONH on all transport modes

Inquiry us

Our Latest Carbide powder

High Purity Tungsten Carbide WC Powder Cas 12070-12-1, 99%

Tungsten carbide, a mixture of tungsten (and carbon), is an organic compound. The molecular formula of tungsten carbide is WC, and its molecular weight is 195.85.Size of the particle: -325mesh Purity: 99% About Tungsten Carbide WC Powder: Tungs…

High Purity Tantalum Carbide TaC Powder Cas 12070-06-3, 99.9%

Tantalum carbid is a white metal-like cubic cubic crystalline product that falls under the category of sodium chloride. At the moment, tantalum carbide is used as an inhibitor for cemented carbide-sintered grain growth.Particle Size: 325mes Tantalu…

High Purity Aluminum Carbide Al4C3 Powder CAS 1299-86-1, 99%

Aluminum carbide can be described as a green-gray, powder with an Al4C3 molecular formula. It is commonly used in metalurgical and catalytic processes.Particle Size: 325mesh Purity: 99% Aluminum Carbide Al4C3 Pulp: Aluminum carbide It is an or…