Products

  • 0
  • 0

What problems should we pay attention to in the development of graphite technology?

OPEC+ is likely to stick to its plan for a small increase in oil production in May despite a surge in oil prices caused by the Ukraine crisis and calls from consumer countries such as the United States for more supply.

Several oil consumers, including the US, have urged producers to boost output further, for the crude price has hit its highest level since 2008 of more than $139 this month. But major OPEC producers including Saudi Arabia and the United Arab Emirates did not raise their output targets, and other countries like Russia avoided talking about the subject of Ukraine.  

OPEC+ is made up of the Organization of Petroleum Exporting Countries (OPEC) and the oil-producing Allies which is led by Russia. Since August 2021, OPEC+ has been sticking to its plan to increase production by 400,000 b/d per month, which will rise slightly to 432,000 b/d from May 1st.

This increase did not mean OPEC+’s concession to consumer countries demanding more oil, but an outcome of an internal recalculation of reference production levels, raising quotas for Saudi Arabia, Russia, Iraq, the United Arab Emirates, and Kuwait.

The supply and prices of many other products in global market like the natural graphite will continue to be influenced by the oil supply shortage.


According to the above analysis and discussion, the author believes that when using natural graphite as raw material to develop artificial graphite, the following issues need to be paid attention to in terms of technology:

Surface modification of natural graphite. Compared with carbonaceous materials such as petroleum coke and pitch coke, natural graphite has fewer oxygen-containing functional groups on the surface, lower activity, and poorer binding force than coal tar pitch.

Therefore, with natural graphite, especially natural flake graphite as the main raw material, the carbon graphite products prepared according to the artificial graphite production process inevitably have the problem of poor mechanical properties. Appropriate surface treatment of natural graphite is required to increase the content of oxygen-containing functional groups on its surface.

Purification of natural graphite. The purity of carbonaceous raw materials such as petroleum coke and pitch coke is relatively high, and the ash content is usually less than 0.5%, while the purity of natural graphite treated by flotation is relatively low, and the carbon content is usually below 90%.

Therefore, carbon graphite products prepared from natural graphite are often limited in their application fields due to their low purity and poor comprehensive performance. High purification treatment of natural graphite is one of the ways to solve this problem.

The cost of chemical purification is low, but the water consumption in the washing process is large and the pollution is large, while high-temperature purification has the problem of high cost. Some people also think that block graphite can be prepared according to the production process of artificial graphite, and then subjected to high-temperature heat treatment above 2500 ℃.

1648862424671769.png

While the "carbon" phase is graphitized, the impurities in the natural graphite phase are removed, but firstly, the production cost is increased, and secondly, the defects formed after the gasification of impurities often cause the performance of the product to decline.

The particle size of natural graphite. To improve process performance and product performance, in addition to fine-structure carbon-graphite products, most carbon-graphite products need to use different grades of carbonaceous raw materials in the batching process. For some large-sized products, the particle size of carbonaceous raw materials even reaches The flotation-treated natural graphite is often in the form of a fine powder, and the particle size is only tens to hundreds of microns. Therefore, the use of natural graphite as a raw material is limited to the preparation of fine-structure carbon graphite products.

Although natural microcrystalline graphite with different particle sizes can be obtained, due to its low purity and high cost of high-temperature purification, there is no report on the preparation of coarse-structure carbon graphite products using natural microcrystalline graphite as raw material. To solve the problem of the lack of large particles of natural graphite, it is recommended to use the "secondary coke" process in the treatment of carbon black raw materials in the artificial graphite industry.

Volume shrinkage during preparation. In the preparation process of artificial graphite, especially in the graphitization process, since the arrangement of carbon atoms gradually changes to a regular graphite structure, the volume shrinkage of the product is relatively large.

The advantage of this volume shrinkage is that it can increase the density of the product, but when the shrinkage is uneven, it is easy to cause the product to crack. When natural graphite is used as raw material, the density and mechanical properties of the product are lower due to the smaller volume shrinkage during carbonization and graphitization.

In addition, when developing artificial graphite with natural graphite as raw material, it is also necessary to consider the issue of comprehensive production cost.

Since the price of flotation natural graphite is similar to that of calcined petroleum coke and pitch coke, and then purified to a carbon content of 98%, the price of natural graphite is nearly twice that of calcined petroleum coke and pitch coke. In addition to the above-mentioned several carbon graphite products that have formed a large industry, the proposal of most technical routes and technical measures will greatly increase the production cost.

High quality graphite manufacturer

Luoyang Moon & Star New Energy Technology Co., LTD, founded on October 17, 2008, is a high-tech enterprise committed to the research and development, production, processing, sales and technical services of lithium ion battery anode materials. After more than 10 years of development, the company has gradually developed into a diversified product structure with natural graphite, artificial graphite, composite graphite, intermediate phase and other negative materials (silicon carbon materials, etc.). The products are widely used in high-end lithium ion digital, power and energy storage batteries.

If you are looking for graphite or lithium battery anode material, click on the needed products and send us an inquiry:sales@graphite-corp.com

 

 


 

 


The current international situation is highly uncertain, and its economic impact has not been able to be assessed properly. In addition, rising energy and commodity prices and supply chain disruptions are expected to push the price of the natural graphite higher.

Inquiry us

Our Latest Products

High Purity Iron powder Fe Powder CAS 7439-89-6, 99%

Recently, the Bulgarian Gas Company said that Bulgaria is negotiating with Gazprom on resuming natural gas supply, and there is a possibility that Russia will resume natural gas supply to Bulgaria.Since the outbreak of the conflict between Russia and…

High Purity Tin Sn Powder CAS 7440-31-5,99%

Yesterday, Nancy Pelosi, speaker of the US House of Representatives, arrived in Taiwan, becoming the highest-ranking US official to visit Taiwan in 25 years.The move was interpreted as a direct threat by China, which claims the island is part of its…

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

European Commission President Ursula von der Leyen recently called on India and other countries to support sanctions against Russia over the Ukraine incident. At The Raisina Dialogue forum, von der Leyen said, "We earnestly appeal to all members of t…