News

  • 0
  • 0

High Purity Titanium Silicide TiSi2 Powder CAS 12039-83-7, 99.5%

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



European Commission President Ursula von der Leyen recently called on India and other countries to support sanctions against Russia over the Ukraine incident. At The Raisina Dialogue forum, von der Leyen said, "We earnestly appeal to all members of the international community to support our efforts to achieve lasting peace."  

Von der Leyen says countries around the world that have been suffering from the virus for two years must now deal with higher food, energy, and fertilizer prices. What is happening in Ukraine will not only determine the future of Europe, but also have profound implications for the rest of the world.

Because of the Russia-Ukraine conflict, the prices of many other commodities like the TiSi2 Powder are expected to continue to rise in the future.

About Titanium Silicide TiSi2 Powder:
With the rapid development of large integrated circuits (ULSI), the size of the equipment and equipment is getting smaller, the requirements for equipment size, film quality, and thickness uniformity are getting higher.
At present, the wire width of the semiconductor device has been reduced to less than 0.1 μm, so it is impossible to obtain a continuous conductor having a low resistance during the original process.
New materials, new processes, and new deposition systems must be found to improve or replace aluminum and heavy-doped polysilicon for circuit metallization.
In these new materials, metal silicon having high conductivity and high-temperature stability has increasing interest, compatible with the current microelectronic manufacturing process. Titanium Disilicide has low resistivity, high temperature and good stability.
In a commonly studied metal silicide (such as TSI2, Nisi, Cosi2, WSI2, Tasi2, MOSI2), silicide (Tisi2) has ideal characteristics: high conductivity, high selectivity, good thermal stability, good SI Adsorption, good process adaptation of silicon adaptive connection parameters. Therefore, in the integrated circuit device, titanium silicide is widely used to produce a metal oxide semiconductor (MOS), a metal oxide semiconductor field-effect transistor (MOSFET) and a dynamic random access memory (DRAM) gate, source/leakage, mutual contact ohm. Feel free to send an inquiry to get the latest price if you would like to buy Titanium Silicide TiSi2 Powder in bulk.

Characteristics of Titanium Silicide TiSi2 Powder:
Titanium silicide TiSi2 powder (CAS 12039-83-7) has a high melting point, high corrosion resistance, high oxidation resistance, good electrical conductivity, high temperature ductility, a binary alloy systemthe intermediate phase.

Technical Parameter of Titanium Silicide TiSi2 Powder:

Product Name MF Purity Particle Size Melting Point Density Color
titanium silicide TiSi2 99% 5-10um 1620℃ 4.0 g/cm3 black


Chemical Composition of Titanium Silicide TiSi2 Powder:

TiSi2 Ti Si C P Fe S
>99% 46.32% 52.5% 0.02% 0.02% 0.19% 0.01%


How is Molybdenum Silicide MoSi2 Powder produced?
Di silicide can be obtained from the reaction between titanium or hydride and silicon.
Ti + 2 Si → Tisi2
Aluminum heat can also be performed by the ignition of aluminum powder, sulfur, silica and titanium dioxide or hexafluoritititoetice, by electrolysis of hexafluoride titanate and titanium dioxide, or through tetrachloride reaction.
Another method is to react with titanium tetrachloride to silane, dichloronilane or silicon.
TiCl4 + 2 SiH4 → Tisi2 + 4 HCl + 2 H2
TiCl4 + 2 SiH2Cl2 + 2 H2 → Tisi2 + 8 HCL
TiCl4 + 3 Si → Tisi2 + SiCL4
 
Applications of Molybdenum Silicide MoSi2 Powder:
Titanium silicide is used in the semiconductor industry. It is typically grown by means of salicide technology over silicon and polysilicon lines to reduce the sheet resistance of local transistor connections. In the microelectronic industry, it is typically used in the C54 phase.
1. Silicide Titanide is low, the melting point is high, and the chemical properties are stable, and there is a broad use prospect in the microelectronics field.
2. Aerospace industry, ship submarine manufacturing, medical, jewelery manufacturing.

Packing & Shipping of Titanium Silicide TiSi2 Powder :
We have many different kinds of packing which depends on the titanium silicide TiSi2 powder quantity.
Titanium silicide TiSi2 powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Titanium silicide TiSi2 powder shipping: could be shipped out by sea , by air, by express as soon as possible once payment receipt.

 

Titanium Silicide Properties

Other Names TiSi2 powder, titanium disilicide
CAS No. 12039-83-7
Compound Formula TiSi2
Molecular Weight 104.04
Appearance Black Powder
Melting Point 1470 °C
Boiling Point N/A
Density 4.02 g/cm3
Solubility in H2O N/A
Exact Mass 103.9018
   
   

Titanium Boride Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
RTECS Number N/A
Transport Information N/A
WGK Germany N/A

With the outbreak of the Russia-Ukraine conflict, the market is increasingly worried about the potential disruption of Russia's energy supply. Geopolitical premiums have pushed up the price of crude oil and natural gas, and the energy price is expected to remain high in the short term. Affected by this, the market price of the TiSi2 Powder may continue to rise.

Inquiry us

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Vanadium Boride VB2 Powder CAS 12007-37-3, 99%

High Purity 3D Printing Alloy CoCrW Powder

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

Supply Magnesium Granules Mg Granules 99.95%

High Purity Magnesium Diboride MgB2 Powder CAS 12007-25-9, 99%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

Our Latest News

Application Fields of Tungsten Rods

Tungsten Rods: Applications The tungsten bar is a rod shaped material, which has many benefits, such as its high density, thermal conductivity, corrosion resistance, etc. It is widely employed in the manufacture of high-temperature heaters and high…

A detailed introduction to surfactants

What are surfactants, and how do they work? Surfactants belong to a class that reduces surface tension. They can be adsorb on interfaces such as gas-liquids or liquids-liquids. By doing so, they change the properties and affect the stability, wettabi…

What are lithium battery anode materials

Lithium battery anode materials are materials that can store and release lithium ions, and they are an important part of lithium batteries. In the construction of lithium batteries, anode materials are responsible for accepting lithium ions from th…