Answers

  • 0
  • 0

Global Tantalum Carbide powder market trend 2022-2030 What is Tantalum Carbide TaC Powder? by Newstfmpage

The roble had hit a record low after the West imposed sweeping sanctions on Russia for its aggression in Ukraine. Russia's president recently ordered exports of Russian gas to "unfriendly" countries to be settled in robles. The speaker of Russia's upper house of parliament said Moscow was prepared and could shift supplies to markets such as Asia if Europe refused to buy Russian energy.

European countries, which pay mostly in euros, say Russia has no right to reset contracts.  The G7 rejected Russia's demand and urged companies not to agree to pay in robles, saying most contracts stipulated payment in euros or dollars. Wholesale gas prices in Europe have risen further recently on concerns about potential supply disruptions.

The Kremlin spokesman said, "According to the March 31 deadline set by Russia's president, we are developing all payment methods to get a simple, understandable, and feasible system for relevant European and international buyers,"

The markets and prices of more commodities like the Tantalum Carbide powder would be affected because of the volatile international political situations.

Introduction to Tantalum Carbide TaC Powder
Tantalum carbide or TaC is a light brown metallic cubic crystal powder, belonging to the sodium chloride cubic crystal system. The density is 14.3g/cm3.
Insoluble in water, insoluble in inorganic acid, soluble in hydrofluoric acid and nitric acid mixed acid and decomposition. It has strong oxidation resistance and is easily melted and decomposed by potassium pyrosulfate. Has high conductivity, and resistance of 30Ω at room temperature, showing superconductivity.
Tantalum carbide is used for powder metallurgy, cutting tools, fine ceramics, chemical vapor deposition, hard wear-resistant alloy cutting tools, molds, and additives for wear and corrosion resistance structural components to improve the toughness of alloys. The sintered body of tantalum carbide shows a golden color and can be used as watch decoration.
 

Tantalum Carbide TaC Powder Properties
Other Names tantalum(IV) carbide, TaC powder
CAS No. 12070-06-3
Compound Formula TaC
Molecular Weight 192.96
Appearance brown to dark brown powder
Melting Point 3850°C
Boiling Point 4780-5470 °C
Density 14.3-14.7g/cm3
Solubility in H2O insoluble
Exact Mass 192.948

 

Tantalum Carbide TaC Powder Cas 12070-06-3
 

 

Preparation Methods of Tantalum Carbide TaC Powder
1. In industry, mix tantalum pentoxide powder with solid carbon ball mills, get the mixture reduced and carburized in a non-oxidizing atmosphere (mainly vacuum and argon atmosphere) at 1700, to prepare TaC powder with a particle size greater than 2μm.
2. Nano tantalum carbide powder was prepared by heat treatment in the non-oxidizing atmosphere with the liquid precursor method. 5mL of anhydrous ethanol was added into a small beaker containing 0.50gTaCL5, and stirred evenly with a glass rod. Then, it was put into an ultrasonic cleaner with a heating temperature of 55 and a working frequency of 40kHz, ultrasonic power was 80W. After ultrasonic oscillation for 5-10min, 0.10g nano-activated carbon was added, and the oscillation continued for 15-20min. Pour it into the crucible and coat it evenly on the inner wall, and dry it with a hot fan. The crucible with the sample was placed in a vacuum hot pressing furnace, and high-temperature treatment was carried out at 1300 in a vacuum of 100Pa or hydrogen atmosphere; Or at 1400 in argon atmosphere, holding time is 0.5h, the heating rate is 20/min. After the experiment, brush the products in the crucible with a brush. 
3. Heat in the air to convert to tantalum pentoxide. Can be fused with potassium pyrosulfate.  By metal tantalum and carbon or tantalum pentoxide and black in an inert atmosphere heated to 1900 reaction prepared.
4. Use tantalum pentoxide and methane as the reaction gas, argon as the carrier, using silicon carbide resistance from the external radiation heating, carbonization, or tantalum pentoxide mixed with carbon black, pressurized powder molding, heating in hydrogen or vacuum.
 

Applications of Tantalum Carbide TaC Powder
It is widely used in industry and the military. In cemented carbide, it is widely used as a kind of additive. Its main function is to improve the high-temperature strength of cemented carbide and inhibit the growth of tungsten carbide particles. 
In cutting tools, used as a hard coating to increase the chemical resistance and wear resistance of the base metal; 
In the military, it can be used as a coating for jet engine turbine blades and rocket nozzles, which can significantly improve their ablative resistance and prolong their service life. 
Because of its good conductivity, it can also be used as electrode material, using electric discharge wire cutting into complex shapes; 
And as the second phase particle reinforced metal matrix composites, it can be used in aerospace, metallurgy, building materials, electric power, hydropower, mining, and other fields.
 

Main Supplier of Tantalum Carbide TaC Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality tantalum carbide TaC powder, please feel free to contact us and send an inquiry. ([email protected])

With Tesla's new factory in Germany starting Tantalum Carbide powder. In the future, the demand for Tantalum Carbide powder will become more and more extensive. Please feel free to contact us for the latest news on Tantalum Carbide powder.

Inquery us

Our Latest Answers

Global Superplasticizer market trend 2024-2026 The Effect of Superplasticizer by Newstfmpage

Adding high-efficient water reducing agent is the most direct and effective means to adjust and optimize the ratio of concrete and improve and strengthen the properties of concrete, which can meet the requirements of most concrete construction at pre…

Global BAM powder market trend 2024-2028 High Purity BAM Aluminum Magnesium Boride AlMgB14 Powder by Newstfmpage

From April the French government will reduce fuel taxes slightly to ease the burden on consumers. Warned of possible energy shortages in France by the end of the year and called on the French to conserve electricity and gas from now on, saying that i…

Global 316L powder market trend 2025-2029 High Purity 3D Printing Stainless Steel SS 316L Powder by Newstfmpage

Gold is a high-quality hedge hedging tool, favored by investors. Especially in recent years, with the increasing instability of the world economy, gold has become one of the preferred asset allocations of investors because of its functions of hedging…