Analysis of the advantages of using electric heating to conduct heat in the print shipping label machine

Analysis of the advantages of using electric heating to conduct heat in the print shipping label machine

At present, energy conservation and environmental protection are advocated, and boiler transformation is carried out. The steam heating and boiler heating methods used in the heater of the woodworking board hot press are gradually eliminated. Instead, most of the board factories choose the name of the electric heating guide product, using high-temperature heat-resistant heat transfer oil as the carrier, and forcibly closing the liquid phase circulation through electric heating and high-temperature oil pumps to achieve the role of heating equipment.

The name of the electric heating product uses high-temperature heat transfer oil as the heat transfer medium, which is heated by electric heating, and the heat carrier is forced to circulate in the liquid phase through the high-temperature oil pump to transfer the heat energy to the heating equipment. Temperature probes are installed on the heat transfer oil inlet and outlet to ensure the required temperature.

The advantages of the electric heating print shipping label machine are reflected in the following aspects:

1. The name of electric heating and heat conduction products has high efficiency and saves energy. We all know that steam will only release heat when it reaches the hot plate and condenses into water. At this time, if the hot water can be recycled, part of the heat loss can be reduced. If it cannot be fully recycled, the heat contained in the hot water will be completely wasted. According to statistics, about 20% of the heat in steam heating is wasted. In the electric heating heat-conducting oil furnace, the heat-conducting oil is circulated for heating, which will not cause unnecessary heat loss, and the efficiency of the print shipping label machine can reach 90%, which saves energy. The print shipping label machine heating is achieved by heating the heat transfer oil through the heating tube of the electric heating heat transfer oil furnace. Unlike steam heating, it needs to be continuously exhausted to heat up, resulting in a lot of heat waste.

2. The print shipping label machine has high safety and uniform temperature. In order to meet the heating requirements of the print shipping label machine, the boiler pressure must be above 13 kg, while the print shipping label machine generally only needs 3-4 kg pressure to heat the temperature to a maximum of 350°C. Since the temperature of the steam depends on the pressure, when there is a difference in position, there is a difference in pressure and a difference in temperature. The steam-heated plywood hot press is prone to temperature differences and uneven heating, which affects the quality of the plywood. The heat transfer oil used in the electric heating heat transfer oil furnace has good heat transfer performance, and the temperature is uniform and stable, and there will be no temperature difference.

How the print shipping label machine works?

For different products, one of its heating rates can actually be selected. Its titanium alloy indenter can ensure the average temperature, rapid temperature rise, and prolong the service life. The pressure head also adopts a horizontal and thick design to ensure the average pressure of the components. And also has a digital display pressure gauge, which can be preset in the pressure range. The principle of the print shipping label machine is also the principle of using the pulse heating of the indenter. The surface of the welding head is specially designed. The resistance of the welding surface is very small, and the current will continuously change the voltage and current to a level of heat conduction in the cross-section with the smallest resistance. The oil and electric heaters are safe, and the temperature and temperature differences are even. In order to meet the heating requirements of the print shipping label machine, the boiler pressure is greater than 13kg. The heat transfer oil and electric heater usually only need 3-4 kg pressure, and the temperature can be heated to the maximum of 350 because the temperature of the steam depends on the pressure. When the location is different, there is a pressure difference, and there is also a difference in temperature. The heat-conducting oil heater is easier to heat than the boiler, and the automatic temperature control can advance the press in advance to stabilize the pressing temperature. Because there are many hidden dangers in the boiler, it needs to be inspected once a year, and a special boiler room is set up for special operation, which virtually increases the cost of the enterprise.

3. Improve production efficiency and reduce enterprise costs. The print shipping label machine is easy to operate, and the automatic temperature control can heat the press in advance to stabilize the temperature of the press. The print shipping label machine has good stability, and it also has a great effect on improving the quality of the product. Under the current market economy situation, the print shipping label machine industry is actively trying to reduce production costs and improve product quality. The transforsteam heating print shipping label machine into electric heating print shipping label machine have proven to be an effective way.

Work advantage of print shipping label machine

1. According to statistics, about 20% of the heat in steam heating is wasted. However, the electric heating print shipping label machine heat conduction oil circulating heating will not cause unnecessary heat loss. The thermal efficiency of the electric heating oil mold temperature machine can reach 90%, which saves energy. The heating of the hot press is achieved by heating the heat transfer oil through the heating tube of the electric heating oil mold temperature machine. Unlike steam heating, it needs to be continuously exhausted to heat up, resulting in a lot of heat waste.

2. Electric heating oil mold temperature machine has high safety and uniform temperature. The temperature difference of the electric heating oil type mold temperature machine is plus or minus 1℃. In order to meet the requirements of the print shipping label machine, the boiler pressure must be more than 13 kg, while the electric heating oil type mold temperature machine only needs 3-4 kg pressure to heat the temperature. Up to 300°C. Since the temperature of the steam depends on the pressure, when there is a difference in position, there is a difference in pressure and a difference in temperature. The steam-heated hot press is prone to temperature differences and uneven heating, which affects the quality. Electric heating oil type mold temperature machine uses heat transfer oil with good heat transfer performance, the temperature is uniform and stable, and there will be no temperature difference.

3. Improve production efficiency and reduce enterprise costs. Compared with boiler heating, the electric heating oil mold temperature machine is simple to operate, and the automatic temperature control can heat the press in advance to stabilize the temperature of the press. As there are many hidden safety hazards in boilers, annual inspections are required, and special boiler rooms are set up to be operated by dedicated personnel. This virtually increases the cost of the enterprise. Because the electric heating oil mold temperature machine has a uniform temperature and good stability, it also has a great effect on improving product quality. Under the current market economy situation, the entire industry is actively trying to reduce production costs and improve product quality. The transformation of steam-heated presses into electric-heated oil-type mold temperature machines has proven to be an effective way.

4. The electric heating oil type mold temperature machine has high thermal efficiency and saves more energy.

The print shipping label machine cleaning

The print shipping label machine are widely used in many fields such as wood production and processing, decoration, building materials, etc. We must pay attention to timely maintenance during use, so that there will be no problems when using print shipping label machine, especially cleaning.

After using the print shipping label machine, be sure to check to ensure that there will be no problems when you use it next time, and the print shipping label machine needs to be cleaned frequently. If the print shipping label machine is not cleaned in time, a lot of dust will appear on the surface of the print shipping label machine. This dust will cause a lot of damage to the print shipping label machine.

In short, the print shipping label machine must be checked after use, which leads to the problem of the print shipping label machine. Proper cleaning and maintenance of the print shipping label machine can improve work efficiency.

The print shipping label machine supplier

MASCOON is focused on providing the best seamless solutions to our clients. We specialize in supplying kinds of seamless bonding machines, folding machines, gluing machines, hot air seam sealing machines, ultrasonic cutting machines, label printing machines, label cutting machines, etc. Welcome to contact us via: sales@mascoonsewing.com.

Inquiry us